Walrus Audio EB-10 Preamp, EQ & Boost Pedal Cream

The Walrus Audio EB-10 in Cream is a combined Preamp, EQ and Boost Pedal, which allows you to craft your live sound to studio quality levels. Made for seasoned performers who are often performing with multiple instruments, the EB-10 enables balancing between guitars to account for differences in output and tone. The EB-10 is suitable for guitar or bass, allowing the player to shape their instrument’s sound to their exact requirements in any scenario. The enclosure design features original artwork, designed to emulate the vibe of vintage studio equipment.

The Walrus Audio EB 10 is now available from Merchant City Music, Glasgow’s longest-established guitar specialist. We ship fast to the UK, Europe and Worldwide.

Walrus Audio EB-10 Preamp, EQ, and Boost pedal in Cream

A tone tweakers delight, the Walrus Audio EB-10 works as a preamp, EQ and boost to meticulously craft your guitar’s sound allowing for studio-grade electric guitar tone in a live setting. Each rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch.

Use the EB10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use the onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the Boost switch! With nine different EQ positions on each knob, bring out new tonal characteristics you didn’t know your guitar or bass even had.

The EB-10 offers two operating modes, “Live” and “Preset”. In live mode, the pedal responds to current position of all the knobs and switches. Dial in a specific sound and turn the pedal on and off with the Bypass switch. In preset mode, the pedal offers preset slots to store three unique sounds. When in preset mode, the pedal is locked on and the user can scroll through the presets by clicking the Bypass switch. The pedal will boot up in the last known operating mode and if that is preset mode, it loads preset 1 by default. Enter preset mode by pressing and holding the bypass switch for 3 seconds until you see the preset light P1 turn on. Repeat to exit. You are in live mode when all preset lights are off. Refer to the manual on saving presets.